Saturday:

Found out that carb inlet was plugged with gunk, so I took it apart, cleaned it, and put it back together. Also installed an inline filter.

Noticed that the fuel pump was leaking. Took it apert but couldn't fix it... the PO had gunked it up with RTV in an attempt to save it.

Filled the MC with brake fluid, and managed to get the brakes working... still need to be bled.

Got all of the front lug nuts off, lubricated, and back on.

Banged the majority of dents out of both front fenders.

Finally killed the bees that decided to make a nest in the ground by the donor van... after two weeks and six cans of wasp & hornet killer... poured seven dust in their hole... amazing... no more bees!!!

Sunday:

Went to the 22nd annual Back Mountain car show... will post pics in the event section.

Took the fuel pump off the donor van and installed it in the truck.

Took the HEI Dist. off the donor van and started to install it in the truck... I am making a clamp for it today.

Scoped out the Alternator in the donor van... that will be fun to get out... I will probably be cutting the Rad. support out first.

Last edited by Peggy M; 01/19/2023 12:19 AM.
IRWIPI 2005 Peoples Choice
Inky,
"It's not that I haven't done IT... It's that I haven't done IT yet."

--------------------
'48 1-1/2 ton Dump
'57 Chevy Panel
'59 Chevy 2 ton Dump