Originally Posted by nvrdone
I finally had some time to work on the truck.
Since I've always had traction problems, I decided to fab up some old school traction bars. I used a 4" x 6" angle cut to size for the mounting plate & about 30" of 2" x 2" heavy wall tubing for the bar.
After getting them welded up & installed it was time for a test ride.
The truck now hooks up increadibly well !! Like a major smoke show at will !!
Tomorrow they will come off & be sent out for power coating.

How about some pics for those of us that will be needing them soon?

Last edited by cletis; 07/18/2011 4:24 AM. Reason: removed off topic content from quote
~Jim