Originally Posted by Phak1
Yes, a picture would be great from the radiator side that’s missing. It appears that there was a lip on the back side so a measurement of that lip would be really helpful. No rush as it will be awhile before I get to that.

Edit: Also the distance of the beads to the back edge.

Thanks!
I'll put that on my to-do list. I may be able to get out there tomorrow.
[on edit] I got out to the trailer and dug out my splash panel. Here's some photos with dimensions. There's also a 1/4" flange turned down on the back edge as well as the larger bent down piece. The beads end about a 1/4" from the bend. Let me know if there's something else you need on it. I can e-mail the photos to you also. Let me know.
Attachments
IMG_6548.JPG (416.08 KB, 161 downloads)
OVERALL VIEW FROM TOP
IMG_6552.JPG (344.41 KB, 163 downloads)
CLOSEUP OF DIMENSIONS
IMG_6550.JPG (253.89 KB, 162 downloads)
VIEW OF NOTCH AND BEAD FROM THE TOP
IMG_6553.JPG (301.85 KB, 163 downloads)
VIEW OF EDGE FLANGE FROM BOTTOM
Mater.jpg (333.8 KB, 160 downloads)


Last edited by klhansen; 12/05/2023 12:00 AM. Reason: added photos
Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.