2/25/19:I installed the new starter switch and installed a new bypass wire to the coil. I re-wired the coil so the current from the key switch goes thru the resistor. Seems to work, I need to get her fired up to see. Allot more work to do before I get to that point.
Last edited by Phak1; 10/19/20191:17 PM.
Phil Moderator, The Engine Shop, Interiors and Project Journals
1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes Project Journals Stovebolt Gallery Forum
