4/19/19: I received the wiper motor from Fricken Wiper Repair and attempted the installation, but it did not go well. To make a long story short, I installed/removed the motor twice in order to get all the parts installed in their proper sequence before I heard the dreaded plink of something falling on the cab floor. A piece of the control arm pivot pin that was peened over holding the control arm on to the wiper motor fell to the floor. Disappointed, frustrated and pis**d off, I removed the motor. I packed up all of the parts and called it a day!

The next day, I contacted Fricken Wiper Service and they said they would take care of it , no charge. Today all is good!
Attachments
B2E2EA52-7473-442F-872B-11643B2C6B56.jpeg (125.25 KB, 789 downloads)

Last edited by Phak1; 11/10/2019 1:48 AM.

Phil
Moderator, The Engine Shop, Interiors and Project Journals

1952 Chevrolet 3100, Three on the Tree, 4:11 torque tube
Updated to: ‘59 235 w/hydraulic lifters, 12v w/alternator, HEI, PCV and Power front Disc Brakes
Project Journals
Stovebolt Gallery Forum