I don't think I'll be wiring anything more on the passenger side, so I decided to install the running board. Hind sight was I should have installed the running board before the front fender, since the fender sits on top. I just loosened the bolts on the fender and was able to get enough movement to get the bolts on the running in place. But still, it was a lot of work to get all the holes to line up and get the rubber gasket installed between the fender and running board. Still need to get the bolts installed on the rear fender though. That's for tomorrow.

Also, added the top half of the front grille and the flat cover (not sure what it's called).
Attachments
IMG_1528a.jpg (137.79 KB, 182 downloads)
IMG_1527a.jpg (134.22 KB, 176 downloads)

Last edited by UtahYork; 01/30/2026 11:46 PM. Reason: Grammer
~ John in Utah
1946 1/2Ton w/4-speed manual transmission w/1960 235 engine
Here We Go
Follow in his DITY Bay

- If you think about it, it has been one year ago today!