Originally Posted by Bill Hanlon
The resistor goes between battery and the + side of the coil.

Thanks Bill! I just found this: I'll edit my above post.

"Connect the positive battery cable to the starter lug, and also attach a 12 gauge wire to that same lug, through the resistor (if needed) through a toggle switch (or alligator clip) to the positive side of the coil. The black wire from the distributor connects to the negative side of the coil."

Last edited by UtahYork; 04/13/2025 4:51 AM.
~ John in Utah
1946 1/2Ton w/4-speed manual transmission w/1960 235 engine
Here We Go
Follow in his DITY Bay

- If you think about it, it has been one year ago today!