More reproduction fit problems. I mentioned this earlier but the rear tub splash pans behind the rear tires fit like cuss. With the mock up wood and cross sill in place, trimming welding and refitting will be necessary. Also, in order to help get the tailgate to line up, a little slicing, dicing, and welding is necessary on the box sides. But first I will need to remove the rear cross sill in order to doctor the bed side holes to get more left/right movement to help square up tailgate to bed side lines.
Plus something shifted slightly when I welded out the exhaust and the left side pulled 1/2" or so. So I will remove the last leg and adjust it. It almost interferes with the rear splash pan I'm now working on.
The list gets bigger the further in you go...🤦🏼♂️
Are you sure you want to restore these old girls?
🤟🏻🤪🤟🏻
1970 Chevrolet C10 Grandpa's -- My first truck -- In progress to shiny Follow the build in the Project Journal 1950 Chevrolet 1-Ton Dually "Ole Red Girl" In the Stovebolt Gallery More pictures here 1951 GMC 9430 1 ton dually--Shiny! | 1972 Chevrolet C20- Rusty- the puzzle box lid for the C10 | 1962 AMC Rambler American- my wife's Parts trucks- 1951 GMC 9300 | 1951-GMC 9430 | 1951- Chevrolet 1300
