The Stovebolt Site Forums Project Journals Archived Journals 1970 Chevy C10 - Grandpa’s Rebuild.

Box torn apart, cleaned, coat of epoxy on the “in between” panel areas.

1. I will lightly sand this as this primer is tough stuff, then apply a light coat of black and bolt it back together.
2. Put on truck frame.
3. Square up and install tailgate for fitment.
4. Remove tailgate.
5. Install bed wood/test fit.
6. Complete the last few feet of the exhaust.
7. Modify (or get some from the parts 72) the rear tub slash guard and check fit.
8. Weld panels to rear cross sill once happy.

Lots to do.

Hours 396