The Stovebolt Site Forums Project Journals Archived Journals 1970 Chevy C10 - Grandpa’s Rebuild.

Today I tore the right inner fender off that I had hung in place to mock up the right outer fender. I had a large patch piece tacked in place. I welded it out and did a little hammer/dolly work. It's not perfect but is up underneath the fender and it will be covered with box liner. I still need to spot weld in the little "stiffening" brace under the core support on the fender. After planishing,I built that little brace and prepped the underside with primer and left it for the day. Slow but good progress on the inner fender today. Next round I believe I can call both inners done.

Photos to follow.


Cab:78.5
Fenders/frame: 34.5
Doors: 6
Total: 119

🦊😎