EDP primer checked out. The thinner did not soften or remove it so I’m assuming it’s good to go. I began scotch pad scuffing certain areas of some panels in preparation of laying down some Endura epoxy primer. It is tough stuff. We used it on our drilling rig builds back before I shut that down to take a full time teaching position. I also ground/filed/sanded out some rough edges and lips that looked like they would interfere with assembly on the wheel tubs. I opened up the RH bedside to prep the mounting surfaces. The panel looks VERY nice. I was nervous about shipping dents/damage and am happy to report there is just one little bonk on the bedside above the wheel well. I can’t reach it to hammer and dolly so it will get a small coat of filler.
Having box loads of fun here!
Hours 394
Last edited by Fox; 03/22/20229:57 PM.
1970 Chevrolet C10 Grandpa's -- My first truck -- In progress to shiny Follow the build in the Project Journal 1950 Chevrolet 1-Ton Dually "Ole Red Girl" In the Stovebolt Gallery More pictures here 1951 GMC 9430 1 ton dually--Shiny! | 1972 Chevrolet C20- Rusty- the puzzle box lid for the C10 | 1962 AMC Rambler American- my wife's Parts trucks- 1951 GMC 9300 | 1951-GMC 9430 | 1951- Chevrolet 1300
