March 2020

More fitting of passenger side cowl & floor, including reinforcement of transmission opening. Welding passenger side floor in place, fitting and welding flange on toeboard panel.
Attachments
IMG_2776.JPG (151.15 KB, 175 downloads)
Fitting floor, rocker and inner cowl panel
IMG_2778.JPG (180.91 KB, 172 downloads)
More fitting of inner cowl panel - getting closer
IMG_2785.JPG (139.22 KB, 173 downloads)
Front of inner cowl panel fitted - working on the back fit to A-pillar
IMG_2786.JPG (129.49 KB, 164 downloads)
A little heat applied to help the fit.
IMG_2793.JPG (158.26 KB, 162 downloads)
Floor panel tacked in place
IMG_2794.JPG (152.08 KB, 175 downloads)
Fitting transmission opening reinforcement
IMG_2802.JPG (149.59 KB, 165 downloads)
More tacking floor/toe board joints
IMG_2803.JPG (136.41 KB, 176 downloads)
Transmission opening reinforcement spot welded in place
IMG_2804.JPG (147.38 KB, 176 downloads)
"Wing" tab welded in place at floor/toe board bend for reinforcement
IMG_2809.JPG (146.44 KB, 166 downloads)
fitting and welding flange on side of floor panel

Kevin
1951 Chevy 3100 work truck
Follow this saga in Project Journal
Photos
1929 Ford pickup restored from the ground up. | 1929 Ford Special Coupe (First car)
Busting rust since the mid-60's
If you're smart enough to take it apart, you darn well better be smart enough to put it back together.