I am in the “collecting inventory” stage again. With my frame somewhat squared away, I am buying IFS parts before getting back to work on my truck. When I was looking for motor mounts I liked, I came across Paul Horton’s Hotrods up in Breslau Ontario. I liked what I saw, and bought one of their Mustang II Welder Series cross member “kits” They used to ship them as flat stock with laser cut slots where the bends happen, but have changed things up and now ship the two pieces of the X member already bent at 90 degrees. They get placed together and the open corners get filled with a weld bead. The mounts for the steering rack are laser cut, and the box section gets folded into shape, and the openings of the cuts get welded. I opted for coil-over towers for my front end, and they are put together the same way. They send cardboard fitting templates to help with ride height cuts. Once I have all the rest of my front end components, I can pull my frame back out and return to truck work.
Last edited by Paul Mullen; 07/11/20252:30 PM. Reason: Typo
