Connected the trans to the engine and placement looks like it won't cause too many fitment issues. Final cross member fitment will be 3" up from the bottom of the frame rail....the tail shaft angle sits 2.75 degrees downward
Attachments
IMG-3572.jpg (133.64 KB, 343 downloads)
IMG-3658.jpg (137.86 KB, 327 downloads)

Last edited by 32vsnake; 08/10/2021 9:37 PM.
1940 1/2-ton
Low skill and low buck build
Follow in the Project Journals
In the dark of night, she's a looker.