Got the engine and the mounts mocked up (CPP mounts). I ended up having plate steel bent on the top at 90 to slide under the top frame rail and bolted through the top, the bottom edge will be welded to the frame.
Attachments
IMG-3525.jpg (175.92 KB, 349 downloads)
IMG-3526.jpg (158.3 KB, 348 downloads)
IMG-3523.jpg (104.55 KB, 341 downloads)
IMG-3529.jpg (106.94 KB, 342 downloads)
IMG-3530.jpg (175.56 KB, 343 downloads)

Last edited by 32vsnake; 08/10/2021 9:14 PM.

1940 1/2-ton
Low skill and low buck build
Follow in the Project Journals
In the dark of night, she's a looker.