The Stovebolt Site Forums Threads Created By b10

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (baldeagle, 1 invisible), 47 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,003

Posts1,055,244

Members48,418

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Threads Created \| All Posts Threads Created By b10
Title	Forum	Post Time
Stabil or drain tank and carb?	General Truck Talk	06/27/2013 8:43 AM
Exhaust flange Again.	Engine Shop	05/25/2013 8:40 PM
exhaust flange gasket thickness?	Engine Shop	05/22/2013 6:51 PM
valve cover replaced with chrome after market.( Hollow sound)	Engine Shop	05/11/2013 8:58 AM
lifter replacement	Engine Shop	05/08/2013 1:14 PM
number on the block by distrbutor	Engine Shop	05/03/2013 4:50 PM
Throw out bearing?????????????	Driveline	04/28/2013 8:20 AM
NEW throw out bearing (CHIRPS) on start up.	Driveline	04/26/2013 9:08 AM
Spring missing or not ?	Driveline	04/24/2013 8:34 AM
clutch pedal free travel adjust bracket	Driveline	04/22/2013 7:17 PM
wheel colors 1951(RIMS)	Paint and Body Shop	04/20/2013 7:28 AM
chrome valve cover no vents 1958 -235	Engine Shop	04/19/2013 1:35 PM
old pressure plate or new	Driveline	04/15/2013 8:56 AM
friction plates and rivits for 1951 truck- 9and 1/8inch disc.(clutch)	Driveline	04/09/2013 7:28 PM
uni ball holding bracket rubber bushing replace?	Driveline	04/05/2013 10:28 AM
rear bearing support 3 speed 1951 chevy truck	Driveline	03/31/2013 3:01 PM
How much does a three speed trans weight ? 51 chevy truck	Driveline	03/29/2013 5:55 AM
original dash cleaning?	Interiors	03/20/2013 6:29 AM
spray paint used on steering wheel ?	Interiors	03/17/2013 9:35 AM
fuel gauge ?	The Electrical Bay	03/15/2013 6:37 AM
how many trans bolts ? studs?	Driveline	03/09/2013 11:21 AM
1st gear on same shaft as Reverse?( rattle)	Driveline	03/06/2013 12:09 PM
wandering idle update	Engine Shop	03/05/2013 2:55 PM
Wandering Idle	Engine Shop	02/27/2013 11:47 AM
headliner install ?	Interiors	02/25/2013 7:19 AM
195 thermostat in betsy OK	Engine Shop	02/23/2013 3:51 PM
Carb back in Betsy	Engine Shop	02/22/2013 5:01 PM
bc throttle body on a model b rochester running rich	Engine Shop	02/19/2013 5:56 PM
betsy running at 160 with new thermo and sunpo gauge	Engine Shop	02/18/2013 11:41 AM
wire locks for hydralic lifters 1958 235	Engine Shop	02/18/2013 8:13 AM
throttle body on model b rochester is from a bc?	Engine Shop	02/15/2013 9:35 AM
Running temp 235 -6 and do rings spin in the lands while running?	Engine Shop	02/13/2013 11:26 AM
what year is Betsy? 48 to51 ?	General Truck Talk	02/08/2013 11:39 AM
NO heat riser on betsy	Engine Shop	02/07/2013 6:01 PM
Needle valve and seat Model B rochester	Engine Shop	01/30/2013 6:48 PM
cork gasket water pump	Engine Shop	01/17/2013 7:58 AM
fuel gauge goes to full all the time	The Electrical Bay	09/14/2012 8:49 AM
is it a muncy in my chevy truck	Driveline	09/10/2012 9:11 PM
slight rattle in first gear	Driveline	09/07/2012 9:02 AM
1952 Chevy - Pa's truck	Do It Yourself (DITY) Gallery	09/05/2012 8:49 PM

Page 1 of 2