I was able to bring the "new" block home today from the machine shop. 4.030" bore on a 1963 327 block. Deck was milled .008 to clean it up. Crank came in at -.020 mains and -.030 rods. The snout did get drilled and tapped for the harmonic balancer bolt. Pistons are TRW Forged +.030.

The fun starts tomorrow.
Attachments
New_327_Block_small.jpg (220.85 KB, 199 downloads)

Dave

1963 C10 Longbed Fleetside (1977-1987)
1962 C10 Shortbed Stepside (2003 - present)
2006 2500 Dodge Quadcab 4x4 (2007 - present)