I worked on the vent windows today. I have everything assembled but only took one picture! Those bloody rivets for the vertical rubber seal on the vent window were a bugger. I wrecked a few (thanks CP for supplying extras) and then I got smart and welded the rivet set tool and a "drift guide" to my vice. Place rivets, line em up, squeeze, check, good. After this, it went very smoothly...
Except for when I dropped a wavy pivot spring under my bench!

https://photos.app.goo.gl/IrG0dKGFTwF5aLTf1

Hopefully I can get the vent assemblies and side glass installed in the next few days and then the back glass. I will make my goal of having all the glass done by November's end!

Next up,
Wiring and fuel lines. Probably. We will see if I get side tracked...

Last edited by Fox; 10/30/2017 10:01 PM.
1970 Chevrolet C10
Grandpa's -- My first truck -- In progress to shiny
Follow the build in the Project Journal
1950 Chevrolet 1-Ton Dually
"Ole Red Girl"
In the Stovebolt Gallery
More pictures here
1951 GMC 9430 1 ton dually--Shiny! | 1972 Chevrolet C20- Rusty- the puzzle box lid for the C10 | 1962 AMC Rambler American- my wife's
Parts trucks-
1951 GMC 9300 | 1951-GMC 9430 | 1951- Chevrolet 1300