10/29/23 had a couple hours in the garage this morning and made some progress.

The tranny is installed now. High five 🙌

Next is getting the clutch adjusted. If all looks (feels) good I’m going to put some diesel and ATF in and start it up. Will run it about five minutes idling in neutral then drain it. I’ll leave it overnight to dry out then fill with 90 weight mineral gear oil.

Then on to the u-joint.

Doug
Attachments
IMG_0182.jpeg (283.11 KB, 231 downloads)

1954 Chevy 3100
One problem solved doesn’t seem to shorten the list
Montgomery, AL
In Project Journals