Been cuttin and fittin again...most of last and this week too...had bought a pair of usable fenders from a fellow in Utica NY...got one side roughed in...

before

another before

another before

So my prize cob of the week is the bottom of the rear fender...it didnt have a bottom lip....I had some brake line that I bent to fit the bottom lip

in process cob job...

after cutting and fitting

I basically had to cut and fit a new metal flange lip for the fender...I have no holes in the box sides yet so it the new holes are off a little so be it....

a little blurry....

here is the rear of the fender flange....

after cutting and fittin

running boards arrived via the Fastenal Company...they came from Michigan....I have so many parts from so many trucks...I am loosing track of what came from where...oh yeah the running boards are from a 1/2 ton short bed.....so...we will be cobbing again...taking the front of the 1 ton running boards and adding the 1/2 ton ones to fill the gap....

cant wait...

MikeC


1951 Chevy 3800 1-Ton
Howard Knapp
In the Stovebolt Gallery
1948 Chevy 1-Ton (sold Nov 2017)
1953 Chevy 1-Ton (sold 10/1/2016)