The Stovebolt Site Forums The Parking Lot Tons 'o Fun Roll Call for 1-ton-ers

That is exactly what I'm saying. There are just 14 bolts holding that IFS crossmember in place. Three on each side through the bottom of the frame, and four on each side through the side of the frame.

Some years some of the hole sizes are different, but I think you'll find you need to enlarge holes in your frame to make it work, which is just as simple as running a slightly larger drill bit through the holes.

Saying its only 14 bolts may be misleading. Its a lot of work, and will require supporting the motor if it isn't already out.

Thanks for the kind words, I'm always glad someone finds my posts worth reading. Even if just for entertainment value...