The Stovebolt Site Forums Project Journals Project Journals 1941 GMC COE on a modern frame

Well I'm back from vacation and the weather has driven me inside to start back working on the truck.

I'm working on mounting brackets for the radiator and need parts.

Switched to the driveline, looking for advice. At the front crankshaft pulley I have 7.4 degrees down, at the tail shaft it is 7 degrees down and on the diff. I have 7.2 degrees up. The drive line is a very approximate 9 degrees down. The driveshaft is about 28 inches long.I am using a digital inclinometer, now for the question, am I getting to fine in the sights? I also have an analog angle finder and no way could I measure to .1 of a degree.