Hello again;

Today was a productive day. I got quite a few smaller items prepped for slicksand. While searching for parts to assist with the main area of work, I also came across a few items missed that I needed to clean up and prep.
I got the sun visor prepped, the head light base mounts, tailgate hinges, bumper guards and a few interior pieces as well.
I also stripped the dash trim pieces down to bare metal. I used Acetone rather than blasting to preserve the finish. It was a bit more work, but I am happy with the results. I light polish and they should look great.

Stay safe,
Steve
Attachments
PXL_20211204_000300729.jpg (336.82 KB, 102 downloads)
PXL_20211204_000318427.jpg (417.89 KB, 100 downloads)
PXL_20211204_230532888.jpg (539.23 KB, 99 downloads)
PXL_20211204_230550593.jpg (384.57 KB, 99 downloads)

Last edited by Canadian_guy; 12/05/2021 2:09 AM. Reason: Adding text
1946 Chev 1/2 ton - 6V/+ground/Bias-ply original - shake/Rattle and Roll! (SOLD)
1940 Chev 1/2 ton Franken/Restomod