Hello all, Happy New Year's!

I spent the day in the shop, I am still working on the box trim. I had finished the prep work on the passenger side so I moved over to the drivers side to get them both to the same state.
Besides skinning 1 knuckle, the day went well. This side was in a better state than the passenger side so I didn't have to spend as much time reworking the tub, etc.

That was the day, I cut out a little early as the rest of the shop crew had gone home at noon. Time for a clean up and then some excellent Thai food with the family. I am currently watching the world Juniors hockey, Canada vs Finland. A good day, all things considered.
Have a great night,
Steve
Attachments
PXL_20201231_200536658.jpg (278.41 KB, 105 downloads)
PXL_20201231_200549510.jpg (272.16 KB, 105 downloads)
PXL_20201231_200603133.jpg (270.13 KB, 106 downloads)
PXL_20210101_012442935.jpg (248.22 KB, 105 downloads)


1946 Chev 1/2 ton - 6V/+ground/Bias-ply original - shake/Rattle and Roll! (SOLD)
1940 Chev 1/2 ton Franken/Restomod