The Stovebolt Site Forums Threads Created By Bornco

Labor Day

Labor Day

Putting down your wrenches or time for
MORE wrenching?
Wrenching this Labor Day

Plenty of places to share.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

2 members (baldeagle, Tony292), 17 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,003

Posts1,055,244

Members48,418

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Threads Created \| All Posts Threads Created By Bornco
Title	Forum	Post Time
Manual Trans Oil and Diff Oil change intervals	Driveline	03/22/2026 4:12 PM
1960 Apache (C10) Muncie SM318 Synchros	Driveline	11/10/2025 5:44 PM
1960 C10 235: Clutch Fork Clip Issue	Driveline	09/28/2025 6:55 PM
1960 C10 with 235 Flywheel Issue	Driveline	09/21/2025 6:45 PM
1960 C10 Oil Pan Gasket - Jack Engine?	Engine Shop	09/14/2025 4:29 PM
Carpet for 1960 C10 (3-speed)	Interiors	05/17/2023 1:36 AM
1960 C10 Interior Colors	Paint and Body Shop	04/27/2023 1:37 PM
1965 4-speed top loader - Make? Name?	Driveline	10/27/2022 10:43 PM
Where do you guys get your windshield weather stripping?	Paint and Body Shop	09/18/2022 10:30 PM
Replacement carb for 1966 327	Engine Shop	09/02/2022 12:21 PM
What do they call the stock GM wire connector	The Electrical Bay	07/17/2022 6:10 PM
Heater Motor Rusts Out -Seized-	'60-'66 Trucks	12/02/2021 7:42 PM
C10 Front Spindles the same for 1960 through 1966?	'60-'66 Trucks	07/25/2021 8:34 PM
Difference in rim set-back on 19.5 rims	'60-'66 Trucks	10/14/2015 3:38 PM
High Output Alternator putting out 16.68 volts	The Electrical Bay	10/08/2015 11:44 AM
Rochester 1bbl carb leaking from fuel filter	Engine Shop	08/01/2014 1:36 AM
Apply brake and can hear turn signal clicking	The Electrical Bay	05/24/2014 4:04 PM
Sometime spike occurs when applying brakes	The Electrical Bay	05/13/2014 7:11 PM
Differences between ignition switches...	'60-'66 Trucks	04/28/2013 3:48 PM
No signals, brake, radio or dome lights	The Electrical Bay	04/28/2013 2:38 PM
Difference between 230/250 and 292 engine front ends	Engine Shop	03/10/2013 3:14 PM
230 to 292: Balance alignment is different	Engine Shop	02/24/2013 3:21 PM
How to prevent rust at bottom of doors?	Doors	10/01/2012 11:30 AM
Why do my copy from MS word disappear?	Welcome Centre	09/27/2012 11:09 AM
Converting 65 to a dual master with all drums...	'60-'66 Trucks	09/14/2012 2:12 PM
1960 C10 with 235 and Solid lifters	Engine Shop	12/20/2011 5:43 PM
1965 Chevy C30 Dump Truck	Big Bolts	12/14/2011 6:21 PM
Wiring Hazards in a 66 C30	The Electrical Bay	12/01/2011 1:49 AM
1965 292 with 1 barrel: Worn throttle shaft	Engine Shop	09/12/2011 9:47 PM
I fear the 292 has a 230 Harmonic Balancer	Engine Shop	05/17/2011 12:32 AM
Tune-up Specs for 1977 292cu 6 cyl	Engine Shop	05/16/2011 11:45 PM
1965 with 292.. Installing HEI	Engine Shop	05/16/2011 9:26 PM
Tractor Paint - Will paint look patina w/age?	Paint and Body Shop	05/06/2011 5:38 PM
1960 C10 Truck is not level	'60-'66 Trucks	04/23/2011 6:58 PM
Adding Universal Washer Pump to 66 Truck	The Electrical Bay	04/04/2011 9:56 PM
Need help for a current member! Lost his Password!	Welcome Centre	12/31/2010 3:22 AM
1966 Chevy C30 Tow Truck	Big Bolts	10/15/2010 10:33 PM
How to remove reverse lights off 66 stepside pu	'60-'66 Trucks	09/05/2010 3:59 PM
How to change lower bearing in Steering column?	'60-'66 Trucks	05/25/2010 2:55 PM
1960 Brake/Clutch Master: What is the difference	Engine Shop	11/24/2009 8:51 PM

Page 1 of 2