| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,147 Posts1,056,797 Members48,454 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2001 Posts: 793 Bondo Artiste | | Bondo Artiste Joined: Jun 2001 Posts: 793 |
~ Phillip
1949 GMC Suburban - 10 year project
1952 Pontiac Chieftain Convertible straight 8 hydramatic
1945 GMC half ton truck - Driver- Sold 9-15-25
1946 Chevy COE - SOLD 1-5-26 BUH BYE CHEVY!
1959 GMC Half ton long bed NAPCO
| | | | | Joined: Jun 2001 Posts: 793 Bondo Artiste | | Bondo Artiste Joined: Jun 2001 Posts: 793 | I would go with grade 8 bolts to mount not the stainless he mentions in the aution...........
~ Phillip
1949 GMC Suburban - 10 year project
1952 Pontiac Chieftain Convertible straight 8 hydramatic
1945 GMC half ton truck - Driver- Sold 9-15-25
1946 Chevy COE - SOLD 1-5-26 BUH BYE CHEVY!
1959 GMC Half ton long bed NAPCO
| | | | | Joined: Jan 2009 Posts: 121 'Bolter | | 'Bolter Joined: Jan 2009 Posts: 121 | That is John Romero's ebay store. He's a member here and sells on the market place | | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | For $110 I think I"d go to Lowes and buy some 3/4 flat steel and bend my own in a vise!!
...and stop at Ace Hardware on the way home for the bolts washers and pins!
Last edited by Achipmunk; 03/10/2011 4:13 PM.
| | | | | Joined: Jan 2009 Posts: 121 'Bolter | | 'Bolter Joined: Jan 2009 Posts: 121 | For $110 I think I"d go to Lowes and buy some 3/4 flat steel and bend my own in a vise!!
...and stop at Ace Hardware on the way home for the bolts washers and pins! Exactly what i was thinking | | | | | Joined: Jun 2001 Posts: 793 Bondo Artiste | | Bondo Artiste Joined: Jun 2001 Posts: 793 | Never said it was a great deal. But it is a good deal. If you think you can properly form those brackets with just a bench vice your sadly mistaken. Better practice with some junk metal first.
~ Phillip
1949 GMC Suburban - 10 year project
1952 Pontiac Chieftain Convertible straight 8 hydramatic
1945 GMC half ton truck - Driver- Sold 9-15-25
1946 Chevy COE - SOLD 1-5-26 BUH BYE CHEVY!
1959 GMC Half ton long bed NAPCO
| | | | | Joined: Jun 2009 Posts: 118 Wrench Fetcher | | Wrench Fetcher Joined: Jun 2009 Posts: 118 | I did mine with a shop press, that works much better. I tried the vice at first and they looked bad. With the press they are exactly like originals.You do need to find a piece of steel the correct width to place in the middle as you are pressing, I don't recall the width though. | | | | | Joined: May 2010 Posts: 24 New Guy | | New Guy Joined: May 2010 Posts: 24 | just remember they also take a pivot pin.....then a 1/4 inch bolt. | | | | | Joined: Sep 2010 Posts: 42 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2010 Posts: 42 | If there is enough of a demand ( like around 10 people). I will fabricate them for everyone. I have fabricated them for mine and they look original. I can include them with hardware if you need me too.
Please follow-up on this via email and/or PMs.
Last edited by tclederman; 04/03/2011 3:57 PM.
| | | | | Joined: Sep 2006 Posts: 335 Shop Shark | | Shop Shark Joined: Sep 2006 Posts: 335 |
Personal Buying & Selling should take place via PM and/or email.
Last edited by tclederman; 04/03/2011 3:55 PM. Reason: message deleted and explanation posted
| | |
|
|
| |
