Thanks Grigg.

Is the flywheel pressed on or will it come off "easy" once the bolts are out?

Edit: Whew, it slid off easy. Project is about 1/2 done now. A '53 car 235, '55 truck bell-housing and a '67 SM420 all fit together nicely smile
Four more bolts and I can set it into the '79 engine-bay.

Thanks to the Stovebolt forums' knowledge I knew what parts to get for this project.

One more question. What size/length/pitch/grade of bolts hold the SM420 to the bell-housing?

Edit: I figured it out; 1/2x13 by 1&1/4" long w/lock washers.

Kicking myself, now I've got to work in the snow.

Last edited by DADS53; 11/22/2010 10:56 PM.
'53 BelAir 261 3spd/OD 4dr
'54 3100 235 3spd
'79 C30 with a '51 235-'57Bellhousing-'67SM420-14bolt dually
'89 V3500 350/465/205 SRW CC
One Chevy just isn't enough.