Well today piston #1 declared squatters rights and refused to move and the camshaft thrust plate was broken. Other than that everything went good for disassembly.
The bearings were worn but I did not note any pitting or scratches on the crankshaft wear surfaces. The camshaft did not look bad to me, but what do I know. The lifters had a little surface rust on the perimeter but bottoms were shiny and flat. So it looks like the bearings did there job.
Tomorrow when I have better light I will take photos of the rod and main bearings as well as the camshaft, lifters and crankshaft.
Have a good day.
Chris