Well I got the bell housing off today. Tomorrow I will put it on the stand and flip it to start on the bottom end. I also spoke with a local machine shop. They will do the machining and I put it together, so for now that's all lined out.
The engine will not go through a full rotation. Pistons 2-4 will move up and down about an 1 1/2 inch when I rotat the pully by hand . 1 and 6 do not move at all. 1 and 6 move with persuasion.
I would think all 6 pistons should move. So I'm preparing for some disappointment when I get the oil pan off.
Also the hydraulic lifters will not come out. there is play, they just won't pull out. I did not get vigorous with them though.
My plan of action for the lifters is to remove the cam. then tap out the lifters from the bottom.
Or do the lifters have to out to remove the Cam?
Chris
Last edited by Phak1; 10/31/2026 1:12 AM. Reason: Typo