Got the wiring completed (for now) Amazingly, everything works! A few photos below.
Attachments
IMG_2152.jpg (231 KB, 71 downloads)
Headlights working, both high & low beam
IMG_2154.jpg (188.02 KB, 72 downloads)
New backup lights working (I think 66 was the first year for standard BU lights)
IMG_2153.jpg (180.4 KB, 71 downloads)
IMG_2159.jpg (159.14 KB, 72 downloads)
Dome light working. AmAutowire kt came with under dash courtesy lights wired to the dome light. They're in & working but my photos didn't turn out
IMG_2150.jpg (207.29 KB, 73 downloads)
Aftermarket gauges in & working, including the electric speedo & gas gauge 2spd wipers & WS washer working too
IMG_2148.jpg (288.46 KB, 72 downloads)
Under hood firewall showing some of the wiring & WS washer hose routing. Stuck to original routing as much as possible
IMG_2147.jpg (264.86 KB, 71 downloads)
Drivers side under hood. It was tight fitting remote PS reservoir (from the engine donor RV in with the oem horn & WS washer fluid reservior

1966 C-10 Short Stepside
HiPo
Step-by-step ~ and on-going resto build
in the Project Journals