Well I came back from the Southeast Truck Nationals with a new drive and determination to get things completed on the 59'. I worked on the Hydrobooster mount, added a support and welded the nuts for the Hydraulic Clutch Master in place. Welding the mounting nuts to the backside of the mount will allow the Clutch Master to be removed separately if needed.

From here I'll bead blast everything and get it ready for powder coating. The next time the assembly is mounted it will to run the brake lines. The chassis is getting so close to being complete.
Attachments
IMG_20210717_150900272_HDR.jpg (219.44 KB, 195 downloads)
IMG_20210717_150936597_HDR.jpg (226.4 KB, 196 downloads)
IMG_20210717_151019325_HDR.jpg (224.46 KB, 198 downloads)
IMG_20210717_151028272_HDR.jpg (244 KB, 195 downloads)
IMG_20210717_151039927_HDR.jpg (254.33 KB, 193 downloads)

Last edited by TUTS 59; 07/19/2021 4:00 PM.
~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane