Like many of you I do almost all the work on the truck by myself. At the moment I need to turn the frame over to finish the Top Coat, just cant do it myself, so I'm waiting.

In the meantime I have cleaned all the shackle bolts and installed new zerk fittings and greased the new spring eye bushings. Once the frame is flipped I can mount the springs.

I ordered parts this week as well, seems I'm missing 1 front and one rear U-bolt ( my son just lowered his S!10 , Hmmm). I also ordered the hydraulic slave cylinder and release bearing for the clutch. Short of some odds and end with hardware I have most everything for the chassis one hand now.

It's going to be great day when it's on 4 wheels again... thumbs_up

Last edited by TUTS 59; 11/01/2020 9:33 PM.
~ Craig
1958 Viking 4400
"The Book of Thor"
Read the story in the DITY
1960 Chevrolet C10
"A Family Heirloom"
Follow the story in the DITY Gallery
'59 Apache 31, 327 V8 (0.030 over), Muncie M20 4 Speed, GM 10 Bolt Rear... long term project (30 years and counting)

If you don't like driving yourTruck, you won't drive yourTruck..| Living life in the SLOW lane