The Stovebolt Site Forums The Shop Area Engine Shop 58 Stepvan engine swap

I will take some more images later to-day as well.

Throttle Linkage support Bracket has three Bolt Holes.

Two of these fit on to the two special-topped Head Bolts front left on the Engine...these Head Bolts have a threaded ( 3/8ths National Fine I think, )Stud which sticks up about an inch or so.

The third Bolt Hole, and not visible in the images, the Bracket's front has a Bolt hole which gets a Water Pump Bolt going through it. bracket occupies the same water Pump Hole as the generator support Arm ( which fits behind the bracket...so olne uses a longer Bolt there of course, securing all this and it's share of the Water Pump).

This one is difficult to access since it is behind the Fan Hub/Belt-Pulley.

Or it was difficult for me, since I was approaching it from behind, and my Fan is still in place of course.