| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,052 Posts1,055,719 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| 
#88547 12/27/2002 5:15 PM | Joined: Dec 2002 Posts: 12 New Guy | | New Guy Joined: Dec 2002 Posts: 12 | 58 apache, fuel gauge not registering, ground the wire and the gauge shows full. how much resistance should the sending unit have ? or would it be easier just to replace it?
thanx
Sometimes I wrestle with my demons, sometimes we just cuddle
| | |
#88548 12/27/2002 9:30 PM | Joined: Sep 2002 Posts: 72 Member | | Member Joined: Sep 2002 Posts: 72 |  howziit Mike! i had the same problem in THE PINK LADY('56 3100 series). although the sender looked new(from the outside), it always showed EMPTY. not wanting to mess with it, i simply replaced the sending unit...and the shoddy wiring. upon inspection, i discovered that the brass float was full of gasoline, but the 30-ohm resistor still worked well.
Myron
1956 chevy 3100 stepside, Pro-Street stance, mild 454 BBC/350/9"/13" M/T'S, daily driver, aka THE PINK LADY
1957 Bel-Air coupe, 500 HP blown sbc in progress, aka LANI
| | |
#88549 12/28/2002 12:06 AM | Joined: Feb 2000 Posts: 5,201 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 5,201 | I bought one of these and was real pleased with it. Easy and fast to install. Yogi\'s Fuel sender Joe | | |
#88550 12/28/2002 4:21 PM | Joined: Dec 2002 Posts: 12 New Guy | | New Guy Joined: Dec 2002 Posts: 12 | Thanx for the info and quick response. Will doublecheck resistance on sender and also float integrity, possibly replace unit next payday. thanx again
Sometimes I wrestle with my demons, sometimes we just cuddle
| | |
#88551 12/30/2002 5:06 PM | Joined: Feb 2000 Posts: 986 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 986 | Gator mike if it is the float they are real inexpensive around $5 or so. My sending unit was frozen with rust got it free replaced the float and it works great. Well except the one time I ran out of gas cause I didn't know EXACTLY where empty was! This spring I will ADJUST the float arm!
Good luck!
Brian Moore
1949 3100 5 window Deluxe
"Today is better than yesterday, but not as good as tomorrow"
| | |
|
|
| |
