| |
Click on image for the lowdown. 
====
| | |
1 members (Peggy M),
304
guests, and
4
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,159 Posts1,057,033 Members48,460 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Dec 2011 Posts: 402 Shop Shark | | Shop Shark Joined: Dec 2011 Posts: 402 | I know this has been discussed several times for the AD, but my 57 TF needs an adjuster rod and I will fab one if I can get some help with the dimensions.
Anyone have the time? If so, thanks in advance...
I tried making one out of a piece of hangar strap, but it was too flexible and would not pull the passenger side over enough to unlatch.
Jim
| | | | | Joined: Dec 2011 Posts: 402 Shop Shark | | Shop Shark Joined: Dec 2011 Posts: 402 | | | | | | Joined: Sep 2010 Posts: 695 Shop Shark | | Shop Shark Joined: Sep 2010 Posts: 695 | Sorry I missed this, Jim.
My '58 donor seat might have the rod.
Wouldn't that seat be the same as your '57?
I couldn't let go of the seat or its parts, I need it for my '59... but if I have the rod on it I'll be happy to measure it for you Thursday.
Jerry | | | | | Joined: Sep 2010 Posts: 695 Shop Shark | | Shop Shark Joined: Sep 2010 Posts: 695 | Jim,
To verify the part, I'm looking at my Assembly Manual, Section 1 Sheet 63. Is the Rod referred to as Locking Rod, Part Number 3720200?
Jerry | | | | | Joined: Dec 2011 Posts: 402 Shop Shark | | Shop Shark Joined: Dec 2011 Posts: 402 | Jerry,
Good question. I will check and write back.
Best,
Jim | | | | | Joined: Dec 2011 Posts: 402 Shop Shark | | Shop Shark Joined: Dec 2011 Posts: 402 | Jerry,
Yes, that is the exact part I need measured. Looking at the picture, though, it looks like it has an adjustable clevis type link end.
No worries...If you give me the dimensions of yours, I will build one that adjusts in that range.
Thanks again,
Jim | | | | | Joined: Sep 2010 Posts: 695 Shop Shark | | Shop Shark Joined: Sep 2010 Posts: 695 | My pleasure Jim... I'll follow up soon.
If I can remember my camera, I'll take a few shots to boot.
Can you PM your Email addy for me to send the pics?
Gosh after all this, I hope that rod is on the seat... ha!
I'll know tomorrow fer sure!
Jerry | | |
|
|
| |
