| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,208 Posts1,057,448 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2012 Posts: 1 New Guy | | New Guy Joined: Jan 2012 Posts: 1 | So I'm building a 1950 chevy to be my daily drivers with soem obvious changes so that it runs without killing my wallet haha.
So I'll drive it back and forth to school.
Her name is Lucy and I prayed her into my life because I'm in high school and I had no clue where to begin and so far we have
8 doors
3 hoods
2 frames
2 cabs
3 front fenders
2 back fenders
2 beds
3 seats(frame and all)
2 gas tanks
and some other stuff
and most of it is basically brand new with surface rust
all for 1500$
God is providing and I'm so excited to get Lucy running,
any tips for dis assembly, building and other tips are DESPERATELY needed haha!
| | | | | Joined: Nov 2011 Posts: 13 New Guy | | New Guy Joined: Nov 2011 Posts: 13 | The best piece of advice that I recieved when I started my truck was to sit down and write down all the things that you need to do and then divide them into workable groups. This way you can get a sense of accomplishment throughout the process. Start going to local car shows, introduce yourself to as many people who are knowledgeable or have the type of truck you like.
My experience is that as soon as you can get it ready for body work the better, as that is what has taken the longest and has cost the most money.... Good Luck, don't lose the faith. | | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | Welcome to the Stovebolt TaylorRollins. Sounds like you have a good start on your project. Get it together and just think, You'll never have a truck payment and you'll always be in style.
Where bout's you at in N.C. Close to Spartanburg? you may want to come to the Southern Stovebolt Reunion April 28th. Love to have you. | | | | | Joined: Oct 2004 Posts: 1,780 Master Gabster | | Master Gabster Joined: Oct 2004 Posts: 1,780 | Welcome to the bolt! The first thing you will need is a shop manual or you can read one online. Take it slow, write down your plans (less costly at the end) and make sore to read some of the other forums! | | | | | Joined: Mar 2007 Posts: 4,217 Moderator | | Moderator Joined: Mar 2007 Posts: 4,217 | Welcome Taylor, the tip for dis-assembly is to take pictures and label everything, even if it seems obvious what it's for. I re-assembled stuff 4 years after tearing it apart. Good luck.
Leo | | | | | Joined: Oct 2010 Posts: 111 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2010 Posts: 111 | Welcome aboard. Plan your work and work your plan. It'll be a lot of fun.
Ken | | |
|
|
| |
