| |
Labor Day Putting down your wrenches or time for
MORE wrenching? 
Plenty of places to share. | | Click on image for the lowdown. 
====
| | | Forums66 Topics128,005 Posts1,055,258 Members48,418 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2008 Posts: 239 'Bolter | | 'Bolter Joined: Apr 2008 Posts: 239 | The cab on my '55 1st series sits low on the drivers side. I measured the box and it is level front to back and left to right. I measured the cab and the drivers front and back is 1" lower than the passenger side. I want to fix the problem. Need input.
thanks, Larry | | | | | Joined: Jul 2001 Posts: 3,887 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Jul 2001 Posts: 3,887 | check your cab mounts for rotten or missing rubber parts .... get some body shims at a FLAPS and shim it up - pay attention to what that does to fit of the front sheet metal, might need to drop the other side a bit to split the difference Bill | | | | | Joined: Apr 2008 Posts: 239 'Bolter | | 'Bolter Joined: Apr 2008 Posts: 239 | I'm finally getting back to the cab problem. There is no rot in the truck. The frame sits level. The box sits level. The exact difference is 3/4 inch in the cab. There are no shims between the cab bottom and the frame top. I plan to shim the one side. It may make the problem worse. | | | | | Joined: Apr 2008 Posts: 239 'Bolter | | 'Bolter Joined: Apr 2008 Posts: 239 | I removed the bolts and jacked up the one side of the cab. Placed shims between the cab and the frame. Replaced the bolts. The cab now sits level. As you said that there will be other areas that will be affected. The front end sits fine. The hood opens and closes fine. I'll need to adjust the door. | | |
|
|
| |
