| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,052 Posts1,055,728 Members48,426 | | Most Online14,466 Apr 26th, 2026 | | AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down with Ads! Again, thanks! | |
#67844 10/26/2006 11:11 PM | Joined: Jan 2006 Posts: 16 New Guy | | New Guy Joined: Jan 2006 Posts: 16 | I did a search for U-joint Lubeing and did not get anything so here is my question....
How do you lubricate the U-Joint in the enclosed driveshaft??(54' 3100)
When you lubricate the U-joint...what lube do you use ??
Thanks | | |
#67845 10/26/2006 11:36 PM | Joined: Mar 2005 Posts: 1,513 'Bolter | | 'Bolter Joined: Mar 2005 Posts: 1,513 | As per the 49-51 shop manual: "Remove square head pipe plug from rear of transmission case, lubricate the universal joint and propeller shaft bushings by inserting 1/2 pint of lubricant thru the opening and replace pipe plug." Use the same 90 wt. gear oil that's in your tranny.
Curt B.
1952 1300 Canadian 1/2 ton restomod You Tube | | |
#67846 10/27/2006 1:33 AM | Joined: Dec 2003 Posts: 975 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 975 | Yep, my replacement U-joint came today and had a warning to not use grease, but 90W tranny fluid only... | | |
#67847 10/28/2006 10:30 PM | Joined: Feb 2006 Posts: 428 'Bolter | | 'Bolter Joined: Feb 2006 Posts: 428 | After I had my 52 for a couple of months the u-joint went out. After I replaced the u-joint I lubed with 90 weight gear lube via the square plug in the rear of the tranny. A pint is good, a quart is better mentality prevailed. After filling the tranny, I decided to check the rear end, and gear lube poured out. So note to self follow the manual. Ya don't need more than a cup or so to lube u-joimt. Jimmie. | | |
| |
| |