| |
BUSY BOLTERS Are you one?  The Shop Area
continues to pull in the most views on the Stovebolt. In August alone there were over 22,000 views in those 13 forums.
| | Click on image for the lowdown. 
====
| | | Forums66 Topics126,780 Posts1,039,295 Members48,100 | | Most Online2,175
Jul 21st, 2025 | | | | Joined: Sep 2005 Posts: 1,028 'Bolter | | 'Bolter Joined: Sep 2005 Posts: 1,028 | I know wipers are supposed to slow down when you climb a hill etc...mine stop as soon as I touch the gas.
My vacuum test seems good. Should they stop so easily?
I might replace my fuel pump with a dual stage to increase vacuum to the wipers.
Can I also use the dual pump to halp with vacuum brake assist?
Rich
| | | | | Joined: Sep 2005 Posts: 1,028 'Bolter | | 'Bolter Joined: Sep 2005 Posts: 1,028 | My vac gauge reads around 21 at idle
| | | | | Joined: Jan 2009 Posts: 1,644 Shop Shark | | Shop Shark Joined: Jan 2009 Posts: 1,644 | I rebuilt mine and it works alot better look at the tico section of my pics it's easy and it will help get you're wipers working.
Pete | | | | | Joined: Sep 2005 Posts: 1,028 'Bolter | | 'Bolter Joined: Sep 2005 Posts: 1,028 | Pete
I rebuit mine and it seems to work but not really any better. I have removed it once again to try to reseal it...I think it has a vac leak.
Rich
| | | | | Joined: Sep 2001 Posts: 29,262 Bubba - Curmudgeon | | Bubba - Curmudgeon Joined: Sep 2001 Posts: 29,262 | Get it rebuilt at Fickens, or buy a new or rebuilt wiper motor. Cleaning and lubricating a vacuum wiper motor might help but most often it needs to be rebuilt (parts that wear need to be replaced). A dual-action pump should help but I have had bad luck after receiving a few dual-action pumps that had dried-out on the shelf or had been poorly rebuilt (I'll send them to be rebuilt by Fickens before buying another new or "rebuilt/remanufactured/reconditioned" one). | | | | | Joined: Sep 2005 Posts: 1,028 'Bolter | | 'Bolter Joined: Sep 2005 Posts: 1,028 | I was able to rebuild this again and it seems to work acceptably.
Thanks for the tips guys...I always learn so much on this site.
| | |
|
|
| |
