| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,080 Posts1,056,063 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#51868 11/03/2005 10:00 PM | Joined: Nov 2005 Posts: 41 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 41 | I am preparing to remove the engine/tranny from my new project. It looks like it is going to be a very tight squeze. Can the combo be removed or do I need to remove the tranny first?
Chevy Pete
| | |
#51869 11/03/2005 11:02 PM | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | I like to pull the trans. first unless you have a lot of the body parts off anyhow.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
#51870 11/03/2005 11:28 PM | Joined: Nov 2005 Posts: 41 'Bolter | | 'Bolter Joined: Nov 2005 Posts: 41 | I have pulled the radiator and support, fan, generator, grill, engine shock mount bolts and top tranny cover. My shop manual is for a 51 with a 52 suplement and it was silent on removing the tranny first. Unless someone has some other advice I think removing it would be the fastest way out.
Chevy Pete
| | |
#51871 11/04/2005 1:44 AM | Joined: Dec 2003 Posts: 2,733 Shop Shark | | Shop Shark Joined: Dec 2003 Posts: 2,733 | With the front end sheetmetal gone I see no reason why you need to remove the transmission. I assume it is a 4 speed. On the other hand it is not really all the difficult to unbolt the tranny from the bellhousing and leave it in the chassis. Either way would work OK. | | |
|
|
| |
