| |
Click on image for the lowdown. 
====
| | |
0 members (),
109
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,183 Posts1,057,194 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2008 Posts: 70 'Bolter | | 'Bolter Joined: Mar 2008 Posts: 70 | Does any one out there know who makes steel 36 chevy truck fenders, no fiberglass thanks all
Last edited by GMONIZ; 02/24/2009 12:30 AM. Reason: Qestion does not belong in parts wanted section
frankenstein Fabrications
| | | | | Joined: Dec 2001 Posts: 14,522 Moderator: Welcome Centre, Southern Bolters, Legion Hall | | Moderator: Welcome Centre, Southern Bolters, Legion Hall Joined: Dec 2001 Posts: 14,522 | jpmanyhearts: I don't know of anyone having them right now but you may get a better response if you post this in the "Parts Wanted" Forum. I know there are several guys working on the mid/late 30's right now so maybe some of them can help.
EDIT: you may want to drop a line to Wrenchbender Ret. here on the bolt. I think he and his friend may have an old 36 in thier yard?....and VintageJim use to visit here. He is in Oregon and has some old stuff. I got a 37 door from him but I have since lost his phone number. Even if/when you find one be prepared to do some body work on it!!
Last edited by Achipmunk; 02/23/2009 4:08 PM.
| | | | | Joined: Feb 2000 Posts: 5,237 'Bolter | | 'Bolter Joined: Feb 2000 Posts: 5,237 | I will bet no one has made '36 steel fenders since about 1936! | | | | | Joined: Mar 2006 Posts: 143 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2006 Posts: 143 | Hi JP-- Be sure to get measurements for the bolt holes in the fenders before you buy any that you find-- hole patterns were different for 35-36-37 ( I don't have specific numbers but you can measure on the bed sides for your truck). Sellers are not necessarily aware of the differences and try to say those years are all the same.
Good luck.
Glenn | | | | | Joined: Jul 2007 Posts: 37 Wrench Fetcher | | Wrench Fetcher Joined: Jul 2007 Posts: 37 | Bow tie reproductions in Ridgeville OH makes steel fenders for your truck. Phone 440-327-4800 | | |
|
|
| |
