| |
Click on image for the lowdown. 
====
| | |
1 members (3800GUY),
78
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,186 Posts1,057,309 Members48,468 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2008 Posts: 2 New Guy | | New Guy Joined: Aug 2008 Posts: 2 | Im getting ready to buy new doors and fenders for my '57 burb. Who makes better sheet metal or is it all the same?
Thanks | | | | | Joined: Dec 2003 Posts: 2,953 'Bolter | | 'Bolter Joined: Dec 2003 Posts: 2,953 | The thing I don't like in the last LMC catalog I received is their warning that these panels are made elsewhere and often travel great distances to get to you, so you should be prepared to do some bodywork on them.
If I am buying new panels I don't want to hammering and dollying them. | | | | | Joined: Aug 2008 Posts: 403 Shop Shark | | Shop Shark Joined: Aug 2008 Posts: 403 | Check out the Truck and Car Shop.com in Orange Ca. or Brothers in Corona Ca. BrothersTrucks.com I have recieved some quality products from both of them.
62Blue
Don
62Blue
62Chevy in progress
You've never been lost until you've been lost at Mach3" Paul F Crichmore (Test Pilot)
| | | | | Joined: Sep 2007 Posts: 2,644 Shop Shark | | Shop Shark Joined: Sep 2007 Posts: 2,644 | All those things are made by one company who sells them to anyone with the cash. Fit is iffy. Some minor dings are to be expected. Crunched parts are not acceptable.
Do your research and shop around, Brothers is notorious for high prices. | | | | | Joined: Feb 2001 Posts: 4,095 'Bolter | | 'Bolter Joined: Feb 2001 Posts: 4,095 | i got my fenders and running boards from brothers and was well satisfied. did have a door latch break this week that i bought a year ago and they are sending me a new one, only had it on the truck since june this year. i have bought a lot of parts and i do mean a lot, from bothers and this the first problem. ron
Ron, The Computer Greek I love therefore I am.1954 3100 Chevy truckIn the Gallery 2017 Buick Encore See more pix1960 MGA Roadster Sold 7/18/2017
| | | | | Joined: Oct 2006 Posts: 4,983 Master Gabster | | Master Gabster Joined: Oct 2006 Posts: 4,983 | They are all alike and come from the same little shop in Hong Kong.
I personally like LMC for the ease in ordering. The catalog shows each part in relationship to the rest of the vehicle. That keeps me from buying too much wrong stuff.
~Jim
| | | | | Joined: Oct 2006 Posts: 119 Wrench Fetcher | | Wrench Fetcher Joined: Oct 2006 Posts: 119 | My understanding of the deal is that one or two companies in Taiwan bought the old dies from GM and provide all the US vendors (LMC, Brothers, etc.) with most of the replacement sheet metal. The fit of the offshore stuff is poor at best, downright unusable at worst. I got a left side fender from Dynacorn that is so bad (the crease line is off by at least 3/4") I can't use it. The front of the doors don't match the contour of the fender, and the gap between the door and fender was uneven. If you can, make every effort to revive your old parts and avoid using the offshore junk. And even then, the offshore patch panels need a LOT of help. | | | | | Joined: Sep 2007 Posts: 8 New Guy | | New Guy Joined: Sep 2007 Posts: 8 | well, you guys are all really scaring me about the sheet metal parts! I have a whole winters worth of cutting, welding and filling. I have bought parts from two venders,LMC, Classic Chevy(Chevy Duty) and they seem to be close. Hopefully when I start on the truck I won't have any serious fit issues.
good luck!
Richard Gaglio
| | |
|
|
| |
