Click on image for the lowdown. 
====
| | |
8 members (Rusty Heaps, treegrower, Wickedbass, UtahYork, Gray_Ghost, cmayna, tclederman, Peggy M),
111
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,067 Posts1,055,877 Members48,428 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#25483 04/03/2005 9:05 AM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | I just picked up a '65 SWB Pickup with the original motor/tranny/ etc etc. I was just wondering if there was a place to see how many of these trucks came with the 283 engine.
This one has a " High Torque" 283, at least that's what it says ont he valve cover. It has the power pack heads and A/C. Just kind of curious to learn more about this truck | | |
#25484 04/03/2005 8:55 PM | Joined: Nov 2004 Posts: 1,552 Shop Shark | | Shop Shark Joined: Nov 2004 Posts: 1,552 | Welcome aboard. There are many sources available regarding production numbers for the 1965, C-10 engine and driveline combinations. I would start with a Shop Manual. The 1963 Shop Manual covers most of the equipment on this platform but you must also get the 1965 Supplement. Also, I recommend getting a Factory Assembly Manual for you 1965. I purchased mine from ChevyDuty.com. They are also available on eBay, LMCtruck.com and many other sources. Best of luck with you '65. | | |
#25485 04/03/2005 10:20 PM | Joined: May 2003 Posts: 224 Wrench Fetcher | | Wrench Fetcher Joined: May 2003 Posts: 224 | welcome!!! everyone here is awesome and are always willing to give advise on what ever topic you might have.
congradulations with your new truck. im looking for on of those too. if you dont mind me asking, about how much did it cost ya? | | |
#25486 04/03/2005 10:28 PM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | Originally posted by Murdoc:
welcome!!! everyone here is awesome and are always willing to give advise on what ever topic you might have.
congradulations with your new truck. im looking for on of those too. if you dont mind me asking, about how much did it cost ya? Hey Murdoc, I do't mind telling you. It IS a project truck though so it wasn't too bad of a price I don't think. I paid $1K for it. Here is a picture of it. [img] http://www.mustangmods.com/data/137/dcp02126.jpg[/img] It looks worse than it is, that is all mostly surface rust. So did I pay too much ? | | |
#25487 04/03/2005 10:57 PM | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | hey, welcome Austin! looks to me like ya got a deal there - nothing wrong w/ that dry country 'sunburn', just less paint to get off  don't know if you'll have much luck finding out 'how many' anything on 60's trucks, but by then V8s were gettin more popular, and the story is that by 66 over a third of all Chev trucks produced were V8 - guess that's why they call 60-66 'the V8 era' trucks - in 65 Chev called'em "Work Power" trucks, and according to my references there was 131,395 C10s [C1400] produced in the US in 65 65 was the beginning of the 'camper specials', which option included the 283, so you may have onea those - the AC option would have also included a higher output alternator - mighta been the reason for the 'power pack' option too, tho' all the 283's then were called 'hi-torque' [327's too I think] good luck w/ it, and thanks for the pic Bill | | |
#25488 04/03/2005 11:20 PM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | Originally posted by red58: hey, welcome Austin! looks to me like ya got a deal there - nothing wrong w/ that dry country 'sunburn', just less paint to get off
don't know if you'll have much luck finding out 'how many' anything on 60's trucks, but by then V8s were gettin more popular, and the story is that by 66 over a third of all Chev trucks produced were V8 - guess that's why they call 60-66 'the V8 era' trucks - in 65 Chev called'em "Work Power" trucks, and according to my references there was 131,395 C10s [C1400] produced in the US in 65
65 was the beginning of the 'camper specials', which option included the 283, so you may have onea those - the AC option would have also included a higher output alternator - mighta been the reason for the 'power pack' option too, tho' all the 283's then were called 'hi-torque' [327's too I think]
good luck w/ it, and thanks for the pic
Bill Thanks Bill, I never knew any of that. Do you have any ideas or suggestions of where to start learning more about these trucks in the sense of swapping front suspension, what disk brake set-ups will work, etc etc. I'm also wondering what rear ends came in this truck. Do you have any ideas what the HP and Torque rating this truck would have had with the 283 ? Sorry I have so many questions but I'm trying to learn some stuff. Dan | | |
#25489 04/03/2005 11:23 PM | Joined: May 2003 Posts: 224 Wrench Fetcher | | Wrench Fetcher Joined: May 2003 Posts: 224 | austinbelair
i think you scored yourself a great truck there. im jealous. id would have bought it for a thousand in a heartbeat!! good luck with it and keep us posted. | | |
#25490 04/03/2005 11:27 PM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | Originally posted by Murdoc:
austinbelair
i think you scored yourself a great truck there. im jealous. id would have bought it for a thousand in a heartbeat!! good luck with it and keep us posted. Good because I was really worried that maybe I was paying too much for it. I should be bringing her home tomorrow afternoon, I cannot wait to start tearing into it. It's a one owner truck so I'm hoping to find some old papers or something in there when I start taking it apart | | |
#25491 04/03/2005 11:29 PM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | Hey real quick, while I have some of your attention. I'm used to rebuilding, working on, and buying and selling '55 - '57 Belairs and have NO clue as to what catalogs to start getting. Who should I call or contact for full parts catalogs for this truck ? even websites with online catalogs would be great. Who do you suggest or suggest staying away from. | | |
#25492 04/03/2005 11:57 PM | Joined: Feb 2002 Posts: 12,029 Cruising in the Passing Lane | | Cruising in the Passing Lane Joined: Feb 2002 Posts: 12,029 | you can always get attention from somebody here! just off the topamyhead the LMC Truck catalog is useful for good parts pics, haven't heard any good things on them tho' Jim Carter is fair and helpful, usually, and I like their price Golden State Pickup Parts useta come up w/ great NOS stuff regular, don't know about lately and of course there's the Stovebolts generous sponser, American Classic , who deserves our support in return! also, check the links section from the topa the page - lots of specialty places listed Bill | | |
#25493 04/04/2005 12:17 AM | Joined: Apr 2005 Posts: 7 Junior Member | | Junior Member Joined: Apr 2005 Posts: 7 | Originally posted by red58: you can always get attention from somebody here!
just off the topamyhead
the LMC Truck catalog is useful for good parts pics, haven't heard any good things on them tho'
Jim Carter is fair and helpful, usually, and I like their price
Golden State Pickup Parts useta come up w/ great NOS stuff regular, don't know about lately
and of course there's the Stovebolts generous sponser, American Classic , who deserves our support in return!
also, check the links section from the topa the page - lots of specialty places listed
Bill Great, thanks Bill | | |
#25494 04/04/2005 3:54 AM | Joined: Jan 2005 Posts: 35 Junior Member | | Junior Member Joined: Jan 2005 Posts: 35 | Hi folks
I don't see those trucks in the rough much anymore but I did see the same type of truck in the picture while I was on vacation and business last summer in Houston BC at a trailer park for sale for $500.00 with a original green 292 engine in it 1964 to 1966 style.
It was a short box too would make a good project truck, was dry not rusted out, not an eastern truck just in case someone lives close to that area they might want to check it out, Houston BC is a small town it might still be available.? | | |
#25495 04/04/2005 4:16 AM | Joined: Mar 2004 Posts: 3,068 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 3,068 | Get yourself a couple of magazines. Custom Trucks and Classic Custom Trucks. They are full of vendors that will have everything you'll ever need for your truck, and a lot of their catalogs are free. Just a thought,
Scott | | |
|
|
