The Stovebolt.com Forums Home | Tech Tips | Gallery | FAQ | Events | Features | Search
Help is a click away!

VEHICLE
INFORMATION
KITS


at the

GM Heritage Center
All the details are here.

Searching the Site - a click away
click here to search
New here ??? Where to start?
Click on image for the lowdown. Where do I go around here?
====
Who's Online Now
4 members (baldeagle, Hanks custodian, TUTS 59, carbking), 66 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums66
Topics128,060
Posts1,055,835
Members48,426
Most Online14,466
Apr 26th, 2026
Step-by-step instructions for pictures in the forums
Brad Allen's photos

AD Chevy Trucks

Pictures galore
Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!


Again, thanks!

Previous Thread
Next Thread
Print Thread
#196019 12/22/2005 8:04 PM
Joined: Nov 2005
Posts: 49
B
Wrench Fetcher
Wrench Fetcher
B Offline
Joined: Nov 2005
Posts: 49
Since the wipers did not work when I purchased my truck, I don't know how they are supposed to work, other than running on engine vacuum. What do the two controls do on each motor do? One pulls in and out and the other screws in and out.

Thank-you,
Brian

#196020 12/22/2005 8:07 PM
Joined: Jul 2005
Posts: 308
E
'Bolter
'Bolter
E Offline
Joined: Jul 2005
Posts: 308
I may be wrong but it seems on my 46 the one you pull turns on the wiper and the turn adjusts the speed. I am not sure if mine work as they should, when I give the truck gas they slow down and when I let off the gas they start working again.
Ed

#196021 12/22/2005 8:47 PM
Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
yer right Ed, pull on, turn to slow down, but just pushing the gas accomplishes that faster grin because when you step on the gas the engine vacuum decreases - you can improve that behavior some by getting the fuel pump that has the vacuum assist pump on it

Brian - if yer's don't work at all you need to at least open the wiper motor and clean it out, and then grease the leather flap you find in there to help it seal and stay supple - may need to get it rebuilt

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
#196022 12/22/2005 9:39 PM
Joined: Jul 2005
Posts: 308
E
'Bolter
'Bolter
E Offline
Joined: Jul 2005
Posts: 308
Red58

Thanks for the tip.

Ed

#196023 12/22/2005 9:49 PM
Joined: Nov 2005
Posts: 49
B
Wrench Fetcher
Wrench Fetcher
B Offline
Joined: Nov 2005
Posts: 49
Thanks guys. I took the one motor apart and it was all gunked up, along with causing a significant engine vacuum leak because of a loose inlet tube. No wonder the engine ran better with the choke partially on.

Brian

#196024 12/22/2005 11:38 PM
Joined: Jul 2005
Posts: 1,158
B
Shop Shark
Shop Shark
B Offline
Joined: Jul 2005
Posts: 1,158
Bill:

What kind of grease do you use on that wiper motor leather flap?

-Brendan


~#~#~#~#~
1946 Chevrolet 3600 - "Old Number Seven"

Cavalry's Here. Cavalry's a frightened guy with a rock, but it's here.
#196025 12/22/2005 11:58 PM
Joined: Jul 2005
Posts: 2,031
C
Shop Shark
Shop Shark
C Offline
Joined: Jul 2005
Posts: 2,031
install a sealed coffee can w/ two small tubes soldered in situ. this helps w/ more vacuum volumn


Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe

Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE
#196026 12/23/2005 1:46 PM
Joined: Mar 2005
Posts: 170
N
Member
Member
N Offline
Joined: Mar 2005
Posts: 170
How do you remove the wiper motor? Is it just the big nut around the wiper shaft? My '40 GMC needs some attention too.

Steve


See my 1940 Canadian GMC:
http://community.webshots.com/user/ndnchf
#196027 12/23/2005 5:47 PM
Joined: Feb 2000
Posts: 5,205
J
'Bolter
'Bolter
J Offline
Joined: Feb 2000
Posts: 5,205
Some where I read vasoline works pretty well, but I used motor oil so soften the leather seals, then went back with white lithiom grease, its pretty oily grease and seemed to work ok. Joe

#196028 12/23/2005 7:10 PM
Joined: Feb 2002
Posts: 12,029
F
Cruising in the Passing Lane
Cruising in the Passing Lane
F Offline
Joined: Feb 2002
Posts: 12,029
yes on the white grease as Joe sez

Steve - yes the bezel nut is what holds the early ones on, with a little doober inside to hold the motor in the right position and keep from turning

you guys w/ vacuum motors should consider using the wipermans service - he bought out all the remaining stock from TRICO years ago and really does a good number on'em - work like new for ages after

Bill


Moved over to the Passing Lane

"When we tug a single thing in nature, we find it attached to the rest of the world" ~ John Muir
"When we tug a single thing on an old truck, we find it falls off" ~ me
Some TF series details & TF heater pics
#196029 12/25/2005 6:47 PM
Joined: Apr 2005
Posts: 2,832
C
'Bolter
'Bolter
C Offline
Joined: Apr 2005
Posts: 2,832
If you send your wiper motor off to David Ficken, "the wiper man", you will not believe how much better it works. He's slightly higher than some others but will keep on the promised delivery schedule. Most of the vehicles we do just use the wiper once a year to pass state inspection but, if they actually use them we put an electric vacuum pump in them. It's compact so will fit most anywhere and makes vacuum wipers super since they are infinitely speed adjustable. These pumps are pricey new but so many new cars are having them, especially diesels, that used ones are getting reasonable.


Evan

Moderated by  Gdads51 

Link Copied to Clipboard
Home | FAQ | Gallery | Tech Tips | Events | Features | Search | Hoo-Ya Shop
Powered by UBB.threads™ PHP Forum Software 8.0.0