The Stovebolt Site Forums The Side Lot Southern Bolters 5th Annual Southern Bolters Jamboree, Townsend Tn, May 29-31,

To All, It's about that time of year, we are about 2 months out from the 5th Annual Jamboree. Our gathering is held in conjunction with the Smoky Mountain AD Nationals in Townsend TN. this year the dates are May 29-31. If you are planning to attend please confirm your lodging as accommodations are going fast. This years AD Nationals is the largest yet, there are over 350 Trucks registered already. Typically we gather on Saturday afternoon for a group cookout and fellowship. It's a time for the Southern Bolters to get to together with friends, old and new, this is a family event and everyone is welcome.

I am in the final design stages for T shirts, it will be finished by mid April. Watch for updates on plans and events, be sure to check out the Smoky Mountains AD National's FB

https://www.facebook.com/groups/smokymountainnationals/

I'm booked and ready. Lookkng forward to seeing everyone, old and new.

Wife and I will be there Thursday thru Sunday. We plan on bringing a small propane grill, at least one table and maybe a Blackstone griddle.
May even bring a truck?

Don

I have not decided yet but concidering it. It was a good show last year.

Mom & I are still on track to be there with the 66 C10. Thurs pm thru Sunday am .

Tom and dad reserved our room at checkout last year. Tom registered at opening. We will be there Thursday evening. I think this will be our 4th year. Thank you Craig for moving the Southern
Bolters Jamboree from Lebanon to Townsend. We did enjoy Lebanon while there.

Jim, I'm glad to hear that, we all will enjoy seeing you both again. Is Tom bringing his '54 ?

Well the decision has been made and it is no. Without a co driver and a truck and climbing old age it is prudent that I stay home. I will miss seeing every one.

Ron, I'm sorry you won't be making it to the Jamboree. There is still some time, maybe something will work out

Tom has been working on his '54 and will bring it. I hope there is room for all those trailers. We want a gooseneck to hall 2 '54s! That's another project.

Tuts 59. It is not completly decided. But be on the look out for my last year co driver and his female friend. I am wishing them a safe and fun trip.

Just quick update. I have the design for this years t shirt, it will be going to the printer next week for final changes. I'll post the design once that is completed... I have the Tool Set to be Raffled off at this years event.
I will have stickers again this year, Jon is working on a 30th Anniversary design as well. I will see that Dave adds the 30th design to the back of the event shirt. If you haven't made lodging plans, you should do it soon. This years event is the largest yet for the Smoky Mountain Nationals.

TUTS do you want us to reserve the pavilion at the campground, if so which night? I do have a working grill this year, lol

Pavilion is ours for Friday night.

Archie, that would be great. We usually do our get together on Friday evening. Don mentioned bringing a gas grill as well. You're making Alvin look like a slacker...

I will have a portable gas grill and a portable charcoal grill with us this year.
Maybe some hotdogs for lunch Saturday at the show?
I can also bring a portable Blackstone Griddle if someone wants to do some fancy flipping.
Vicki and I plan on being in Townsend Thursday afternoon.

Don

Edit: Vicki should also have some of her cookies to snack on, if I don’t make her mad?

Then don't make her mad... You do that and we'll have to contend with Alvin as welll

Its all my fault....why is everybody always picking on me. You young'uns just wait.
Don, if you make Vicki mad....I'm gonna be mad at you!!

Sorry boys, I have no control on making Vicki mad. I just say and do things as I see fit.
The same with Linda on modifying her truck to make it more drive able for her. It was just a suggestion.

So I guess I may be meeting up with a cold greeting in Townsend?

Don

Don, I highly doubt that... Linda is just like Vicki only she has to put up with me... I think you're good

Another update on the Smoky Mountain Nationals and 5th Jamboree. We are moving from the location we have had the past 2 years. Dave is moving the Food Trucks to the front area. The registration tent and stage are moving to center of the show grounds, we are going to be located there as well. The one change is that our Odd Year Trucks(Trucks other than AD series) will probably be located near the Tennis Courts.

Dave has been extremely accommodating to us over the past few years, we will just adapt to what changes need to be made. The 2026 show will be moving to a new larger location, Dave will make an announcement soon.

I ask that we all be flexible and as Dave said " Have an open mind"..

Got my show confirmation yesterday in email.
We won’t have a AD, but the entry fee goes all to charity and I would like to donate.

Don

I looked at the FB page for the show but I didn't see where to go to register... Can somebody share a link as to how to do that?

Also ... If anyone camping wouldn't mind sharing a space for me and the Quigley (and trailer) for a night (not sure which yet), I'll gladly contribute to the cost. I am self contained and need nothing but a place to park.

If y'all don't mind a no-account carpet bagger Swamp Yankee crashing yo shin dig ...

John, I forwarded my registration info to editor@stovebolt.com.
Hope it helps!

I didn’t know Maine had swamps?
Don

Thanks Don! I'll take a look in the morning.

SMN also has a U-Tube site that Dave gives a weekly update on the show.
The last one he explained how things should pan out.

youtu.be/z2aSIQk31WM?

Don

Good post Don really got the feeling

Nope -- still not seeing how to register. *IS* there a registration for this event or not?

Don. Look up "Swamp Yankee" on Wikipedia.

https://www.facebook.com/share/p/19kFxg7H1z/?mibextid=wwXIfr

John, try this. Link to JotForm is directly under the picture.

Thanks! I am now registered.

Just watched Dave the leader of the SMN show and he announced that Jim Carter is the major sponcer of the show.
Those who have been to the Midwest Stovebolt Roundup have met him at Mongo's Garage.

Don

Don what’s the headcount working on a leave pass good Jim Carter getting on board been good to Stovebolt members

Don’t know how many Stovebolters will be there, Tuts may have an idea.
Leave pass? Does that mean you are trying to attend the Jamboree? If you do, you will be the celebrity guest star there. So you may be signing autographs.
And yes, Jim Carter has treated us real good over the years. Dave and the show directors have also treated us real good and we should be right next to the stage again this year.

Don

We are at about 20 with Friends and Family. As far as Trucks, 3 or 4 AD series and about the same Non AD Trucks.

You know we always have room for more, especially from down under...

I will not be bringing a truck but I am coming out to see the show. My friend is coming from Florida to meet me at the show. We both look forward to meeting other Stovebolters and putting faces with the names.

We are happy to have you join us, as Alvin says "The more the merrier"..

Glad you and your friend are attending. You will meet a lot of nice, frendly people.

Don

Twin Jimmy r u driving across or flying to Townsend

I am flying in to Nashville on Thursday to meet my friend. We will drive to Townsend on Friday morning as early as possible after a night in downtown Nashville. I am looking forward to meeting everybody.

I had some more stickers made up, these are just for our event tent. All of those members joining us will get one along with a "Southern Bolter’s " sticker.

These are a bit l arger than the event bag stickers and they are die cut .

If a suitable area can be arranged with a flat floor (maybe a trailer?) and access to electrical power, I've been discussing the possibility with another bolter of doing a demonstration of the rear main bearing seal machining procedure for the full circle oil seal. He will be bringing a bare 216 engine block to the show, and I'll have my cylinder boring bar and the adapter plate I made to fit it to the back of the block. I'll also have the spray nozzle aligning fixture for the 216 and early 235 oil pans.
Jerry