The Stovebolt Site Forums The Shop Area The HiPo Shop lowering 64 truck

Ok so i lowered my 64 chevy 1/2 short fleet like 6 months ago. I put 3" drop coils in front and 4" drop coils for rear. So the rear is higher than front. I just ordered 6" drop coils for the rear cause i want it to be lowered and i dont have to c-notch it cause it will still have almost 3" of clearance as long as i do not load the crap out of it... anywasy do you think with the 3/6" drop that i will even out the truck or will the rear be lower than the front?

It's easy enough to measure. Get out the trusty tape measure check things. I have no idea off the top of my head of that will sit even. Good luck.

Kyle

You can always put a load assist airbag set-up in there to help "adjust" the ride height. I think JC Whitney sells them fairly reasonably. I like that idea because it goes in with your suspension rather than instead of your suspension,
Scott

thanks..i think it should be fine..i ordered them from early classic enterprise in fresno. They said that it should be leveled out as if emptied..aslo i wont be c-notchin it they said its not recommend unless i plan on loadin my truck and im not..