The Stovebolt Site Forums The Shop Area Engine Shop '54 chevy 3100 remote oil filter hookup

I'm back on my '54 project. I'm pretty sure which connections on the block feed the filter/oil gauge and then the return.I want to be positive about the connections on the original filter that I got with the project. It has three , 1/8" ports. I believe the top [side] is the inlet, I am thinking the lower [side ] is a drain. the bottom [center] outlet returns the oil to the engine.It will be firewall mounted, since the fenton manifold won't accept it. Will someone here let me know if I am on the right track OR straighten me out. Pictures help, if you can.
Thanks
John Baker

Sounds right to me.

Hope this helps.
https://www.flickr.com/photos/advance-design_parts_co/15652083208/in/album-72157631868452754/
http://www.stovebolt.com/techtips/engines/oil%20filters/index.html

Thanks,
JB

Thanks a lot. It Helps.
John B,