| |
Click on image for the lowdown. 
====
| | |
8 members (David Bush, kades51, BC59, MikeE, Bucker, MickeyP, Rexville48, dt235sd),
97
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,702 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Oct 2013 Posts: 13 New Guy | | New Guy Joined: Oct 2013 Posts: 13 | I am in the short rows of finishing up my custom 53. I have installed the seal in the windlace. I have the outer seal and I think I want to use it. Couple of questions. First....I don't recall ever seeing this seal on any trucks at shows etc. Do people often just leave these seals off or did I just not notice them?? Second... several years ago there was a very good post on Stovebolt showing the correct way to install these seals....can't find it....please help. sojo | | | | | Joined: Jul 2013 Posts: 159 'Bolter | | 'Bolter Joined: Jul 2013 Posts: 159 | There's a great you tube video on this. I think thefillingstation.com sponsors it. Just search YouTube for Chevy truck weather seal. | | | | | Joined: Jul 2014 Posts: 186 'Bolter | | 'Bolter Joined: Jul 2014 Posts: 186 | I just did this twice following the filling station instructions. I did it the first time and the doors would not close. After much research I found that there are two thickness for these seals. Most of the vendors sell the thick stuff, the affordable stuff. Ordered the thinner stuff, from the filling station, pulled the doors off, stripped the molding, cleaned the glue off, and glue the thin stuff on. My suggestion tape on a couple small pieces in key spots and see if the door will function before gluing it on. Just saying. | | | | | Joined: Apr 2008 Posts: 239 'Bolter | | 'Bolter Joined: Apr 2008 Posts: 239 | I also put seals on the doors of my '55 1st series. Used the thicker seal and had problems closing the door. Odered the thinner seals and the doors are sealed and close great. I suggest removing the doors and prior to that, drill 1/8 diameter holes thru the door and each hinge. When installing the doors use couple 1/8 diameter pins to align the doors and then install the hinge bolts, That worked for me. | | | | | Joined: Oct 2013 Posts: 13 New Guy | | New Guy Joined: Oct 2013 Posts: 13 | Thanks to all.....I found the video...it was what I had seen before. I have determined that my application requires the thick seal which is what I have...thanks again. sojo  | | |
|
|
| |
