Well, the bucket seats are bolted in permanently. I messed with them several days to be sure I had them where I wanted them.
UncleBuck06, there is about 8" at the seat bottoms but only about 6" between the seat backs.
Tim, I never fixed them to flip forward but maybe a project down the road for the passenger side.
Here are a couple pics of them bolted where they go...... I started to bolt them to only the top of the seat riser but decided it was not enough. So, I drilled a hole through the top and bottom and bolted them in using big 2" fender washers under the bottom with 3/8" bolts. Here's the pics....
http://i140.photobucket.com/albums/r19/LutherParris/52Panel/Panelseatsect097.jpghttp://i140.photobucket.com/albums/r19/LutherParris/52Panel/Panelseatsect098.jpgand a picture from the rear of the panel.
http://i140.photobucket.com/albums/r19/LutherParris/52Panel/Panelseatsect099.jpgA day at the upholstery shop (maybe around Christmas) and install the E-Brake I want to use and I'm ready to put tags on it. Closer and closer.....to a 6 year ending
