The Stovebolt Site Forums The Shop Area The HiPo Shop 6 cyl. head milling

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

5 members (Gib70, moparguy, Hotrod Lincoln, artinva, Bill Hanlon), 80 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,078

Posts1,055,935

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 6 cyl. head milling panic #767736 08/02/2011 3:28 AM
Joined: Feb 2000 Posts: 5,208 Lee's Summit Mo. 64086 J Joe H 'Bolter
Joe H 'Bolter J Joined: Feb 2000 Posts: 5,208 Lee's Summit Mo. 64086	With a dial indicator and zero lash, you should be able to find the duration with in a few degree's. If you start at .050" and end at .050" you can compare that to most any cam on the market. Theres a lot of number crunching in cam selling! Joe 1937 Chevrolet Inline-powered Streetrod

Entire Thread
Subject	Posted By	Posted
6 cyl. head milling	Oppy	07/25/2011 1:44 AM
Re: 6 cyl. head milling	Hotrod Lincoln	07/25/2011 2:43 AM
Re: 6 cyl. head milling	Oppy	07/25/2011 2:54 AM
Re: 6 cyl. head milling	Greg_H	07/25/2011 3:06 AM
Re: 6 cyl. head milling	Hotrod Lincoln	07/25/2011 4:36 AM
Re: 6 cyl. head milling	Oppy	07/25/2011 5:47 AM
Re: 6 cyl. head milling	Joe H	07/25/2011 2:19 PM
Re: 6 cyl. head milling	panic	07/25/2011 3:05 PM
Re: 6 cyl. head milling	Hotrod Lincoln	07/25/2011 4:29 PM
Re: 6 cyl. head milling	panic	07/25/2011 6:33 PM
Re: 6 cyl. head milling	starfire4	07/26/2011 12:48 PM
Re: 6 cyl. head milling	Joe H	07/26/2011 2:13 PM
Re: 6 cyl. head milling	Hotrod Lincoln	07/26/2011 2:53 PM
Re: 6 cyl. head milling	Oppy	07/27/2011 2:40 AM
Re: 6 cyl. head milling	Hotrod Lincoln	07/27/2011 5:30 AM
Re: 6 cyl. head milling	Oppy	07/28/2011 2:34 AM
Re: 6 cyl. head milling	Hotrod Lincoln	07/28/2011 4:28 AM
Re: 6 cyl. head milling	Oppy	07/28/2011 7:19 AM
Re: 6 cyl. head milling	Hotrod Lincoln	07/28/2011 3:16 PM
Re: 6 cyl. head milling	panic	07/28/2011 3:21 PM
Re: 6 cyl. head milling	Oppy	07/28/2011 10:02 PM
Re: 6 cyl. head milling	Hotrod Lincoln	07/29/2011 12:36 AM
Re: 6 cyl. head milling	Oppy	07/29/2011 2:14 AM
Re: 6 cyl. head milling	Curt B.	07/29/2011 7:40 PM
Re: 6 cyl. head milling	Oppy	08/01/2011 12:59 AM
Re: 6 cyl. head milling	Hotrod Lincoln	08/01/2011 1:18 AM
Re: 6 cyl. head milling	Oppy	08/01/2011 1:42 AM
Re: 6 cyl. head milling	panic	08/01/2011 4:31 PM
Re: 6 cyl. head milling	Joe H	08/02/2011 3:28 AM
Re: 6 cyl. head milling	CrkInsp	08/03/2011 4:19 PM
Re: 6 cyl. head milling	123456789101112	08/04/2011 4:31 AM

Moderated by Fibonachu, KCMongo

Hop To

Link Copied to Clipboard